The CT-6520B Universal Engine Tachometer accepts a large array of revolution detectors to meet different measurement conditions such as location of detector, type of an engine and so on. This tachometer uses a multiplier circuit to both reduce the measurement time and improve measurement accuracy. Analog, digital and pulse outputs are provided as standard.
 |
 |
- A variety of engine revolution detector can be available in combination, for 2/4-cycle engines having from 1 to 8 cylinders.
- Number of input pulses per revolution can be set in the range from 0.5 to 199.5 P/R in 0.5 P/R step
- Three type of outputs; analog, digital and pulse.
- 2 way of power operation ; AC (ranging 100 to 240VAC) and 12VDC (ranging 11to 15VDC)
- 2 of preset setup for "Run Judge" and "Overrun".
|

 |
 |

Applicable Detector (option) Ignition pulse detectors (IP-292 / IP-296 / IP-3000 / IP-3100)
Magnetic detectors (OM-200/OM-1200/MP-910/MP-9100/MP-981/MP-9820)
Magneto vibration detector (VP-201 / 202 / 1210 / 1220)
Opto-fiber sensor (LG-916, LG-9200)
|
|
 |
$3,900.00 |
|


 |
 |
- AP-981 - Acid resistant, Waterproof Electromagnetic Detector
- CT-6700 - ( New ! ) Digital Engine Tachometer
- CT-6700 - ( New ! ) Digital Engine Tachometer
- FS-540 and FS-5500 + FG-1300 - Optical Fiber Sensors and Amplifier
- IP-292 - Clamp on Primary (low voltage) Ignition Coil Pulse Detector
- IP-296 - Clamp on Secondary (high voltage) Ignition Coil Pulse Detector
- IP-3000A - Clamp on Primary & Secondary Ignition Coil Pulse Detector
- IP-3100 - Clamp on Primary & Secondary Ignition Coil Detector (higher sensitivity)
- LG-916 - Optical Detector replaced with the New ! LG-9200
- LG-9200 - Optical Detector
- LG-930 - Optical Detector
- MP-9100 / 910 - Magnetic Rotation Detector
- MP-9100 / 910 - Magnetic Rotation Detector
- MP-981 - Electromagnetic Detector
- MP-9820 - Magnetoelectric (wide range) detector
- MX-005 - ( 5 meter, 2 pin to BNC ) Cable
- MX-010 - ( 10 meter, 2 pin to BNC ) Cable
- MX-015 - ( 15 meter, 2 pin to BNC ) Cable
- MX-020 - ( 20 meter, 2 pin to BNC ) Cable
- MX-101 - ( 1.5 meter, BNC to BNC ) Cable
- MX-105 - ( 5 meter, BNC to BNC ) Cable
- MX-110 - ( 10 meter, BNC to BNC ) Cable
- MX-8105 replaces the MX-805 - ( 5 meter, 6 pin to 6 pin ) Cable
- MX-8110 replaces the MX-810 - ( 10 meter, 6 pin to 6 pin ) Cable
- MX-8115 - ( 15 meter, 6 pin to 6 pin ) Cable
- MX-8120 - ( 20 meter, 6 pin to 6 pin ) Cable
- OM-1500 - Motor/gasoline engine RPM detector
- OM-200 / 1200 - Electromagnetic induction Detector
- SE-1100 - Engine (point and shoot) Tachometer, Upgraded and replaced with the NEW! SE-1200.
- SE-1200 ( New ! ) - High Precision Engine ( point & shoot ) tachometer
- SE-1520 - Discontinued, replaced by the SE-1620 Engine Tachometer
- SE-1620 - Multi Sensor Engine Tachometer
- SE-2400 - Discontinued, replaced / upgraded with the SE-2500A engine tachometer
- SE-2500A - Engine Tachometer, SE-2400 replacement
- VP-1210 - Magneto type Vibration Detector
- VP-1220 - Magneto type Vibration Detector
- VP-201 - Magneto type Vibration Detector
- VP-202 - Magneto type Vibration Detector
|
|